Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you reset the Service light on the Audi A3?

Model: Audi A3 8L, MK 1 - Years 1996-2003
Part: Service warning light

To reset the Service light that appears on the instrument panel of the Audi A3, you need to insert the ignition key into the corresponding slot: in this way, you will be able to hold down the button located on the right side of the panel and at the same time turn the key. At this point, you will notice that the maintenance interval will appear again on the instrument panel: you will need to release the button and then press the button on the left side. At this point, you will see that the light will disappear from the instrument panel.

Posted on 2 July 2024 by ScegliAuto

Video tutorial

Related tutorials

How to reset the service light on a 2016 Audi A3
How to reset the service light on a 2016 Audi A3
Audi A3 (2012-2019 / 8V, MK 3) Today we will explain how to reset the 2016 Audi A3 on your own. To reset the warning light, we turn on the instrument panel and the onboard computer…
How to reset the service light on the Audi A3
How to reset the service light on the Audi A3
Audi A3 (2012-2019 / 8V, MK 3) Today we will explain how to reset the service light on an Audi A3 vehicle independently. The reset should be done only after performing the operatio…
How to reset the service indicator light on the 2022 Audi A3
How to reset the service indicator light on the 2022 Audi A3
Audi A3 (2020-2026 / MK 4, 8Y) In the following article, we will see how to reset the maintenance service light of the 2022 Audi A3. To reset this light, first start the instrument…

    Frequently Asked Questions

    • A3 2012-2019 - How to reset the service light on an Audi A3? Read answer

How to Remove the Right Front Door Panel on an Opel Mokka

To remove the right front door panel on an Opel Mokka, follow these steps: disconnect the battery terminals located in the engine bay, then use a screwdriver to remove the screws from the upper door opening lever and the screws in the handle. Next, remove the covering plastic near the lever. Unscrew the remaining screws on the door panel and detach the retaining clips. Finally, pull the panel away with your hands and unclip it from the door (disconnect the power wiring and the release cable). Reassemble everything in reverse order.

Watch the video!


by ScegliAuto

More videos