Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Clean the Injectors on BMW 3 Series

Model: BMW Serie 3 E46 - Years: 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005, 2006
Part: Fuel injectors

See other generations:
Video tutorial

Let's see how to clean the injectors on BMW 3 Series with the appropriate cleaning kit. Lift the hood and secure it with the prop rod, then disconnect the fuel supply hose that leads to the injectors. Connect the pressure gauge and the cleaning kit to the fuel lines; start running the cleaning fluid from the previously connected kit through the fuel lines of the injectors (repeat this process several times).

Disconnect everything and start the engine. Reinstall the fuel line leading to the injectors after cleaning them of any dirt and deposits.


Updated on 3 March 2026 by ScegliAuto


Related tutorials

How to Clean the Injectors of a BMW Series 3
How to Clean the Injectors of a BMW Series 3
BMW Serie 3 (2005-2013 / E92, E90, E91) Let’s see how to clean the injectors of a BMW Series 3. Lift the hood and secure it with the prop rod, then disconnect the intake hose that supplies …
How to Test the Fuel Injectors on a BMW 3 Series
How to Test the Fuel Injectors on a BMW 3 Series
BMW Serie 3 (1998-2006 / E46) In this video tutorial, you will learn how to test the operation of the fuel injectors on a BMW 3 Series by following the instructions below. First, …
How to Replace the Injectors on a BMW 3 Series?
How to Replace the Injectors on a BMW 3 Series?
BMW Serie 3 (2005-2013 / E92, E90, E91) To replace the injectors on a BMW 3 Series, open the hood to access the components inside the engine bay. Remove the plastic cover on top of the engi…

How to Reset the Tyre Light on a Toyota Aygo?

To reset the tyre light on a Toyota Aygo, start by locating the reset button, which is found in the glove compartment of the front passenger side. Turn on the car and ensure that the tyres are at the correct pressure. Then, press and hold the reset button for a few seconds until the tyre light either flashes or turns off, depending on the model. Release the button and wait for the reset procedure to complete. Restart your Toyota Aygo and check if the tyre light has turned off, indicating that the reset was successful.

Watch the video!


by ScegliAuto

More videos