Do it yourself
Frequently asked questions about cars and motorcycles
The engine oil that will be present inside the Benelli Panarea 125 can be replaced by loosening the drain plug of the oil sump located in the central lower part of the vehicle: once this plug is removed, all the used oil can be drained into a properly positioned container. Then, the oil filter, located in the same position, must also be removed; once the new oil filter is installed, the necessary amount of oil can be added to the tank for topping up.

Posted on 22 November 2025 by ScegliAuto

Video tutorial

Related tutorials

Panarea 125 These brief and simple steps will allow you to perform the routine maintenance service by changing the engine oil on the Benelli Panarea 125 scooter.…
Panarea 125 It will be possible to perform the engine oil replacement on the Benelli Panarea 125 by completely unscrewing the drain plug of the oil sump, which w…
Panarea 125 You can replace the front brake pads on the Benelli Panarea 125 by loosening the screws that secure the brake caliper to the corresponding disc. Once…

How to Remove the Engine from the Piaggio Vespa GTS 250 - 300

In this guide, you will learn how to remove the engine block from the body of the Piaggio Vespa GTS 250 and GTS 300. First, place your scooter on the centre stand and begin by removing the exhaust silencer by unscrewing the bolts; then, unscrew the central bolt of the wheel hub and remove the entire wheel, as shown in the video. At this point, disconnect the suspension from the engine block by detaching the fuel lines and various wiring; then, remove the engine block, applying the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos