Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Follow these simple steps to reset the service light for the routine maintenance of the engine oil change on the MV Agusta F4 1000R. First, place the motorcycle on a stand and turn on the instrument panel by turning the key to position one; then press both buttons on the panel until the menu appears, as shown in the video. Now scroll through the options until you reach the service reset option, confirm it, and execute the reset of the light; finally, turn off the instrument panel and start the engine!

Updated on 14 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil on a MV Agusta F4 1000 R
How to Change the Engine Oil on a MV Agusta F4 1000 R
F4 1000r In today's tutorial video, you will learn how to change the engine oil and oil filter while performing the routine maintenance service on the MV Agus…
How to Replace the Fork Seals on a MV Agusta F4 1000
How to Replace the Fork Seals on a MV Agusta F4 1000
F4 1000r In this guide, learn how to replace the fork seals on the front forks of the MV Agusta F4 1000R motorcycle. First, remove the forks from your bike; t…
Removing Front Wheel on Mv Agusta F4
Removing Front Wheel on Mv Agusta F4
F4 1000r In this video, see how to remove the front wheel on an Mv Agusta F4, following the instructions below. First, place the front stand on your motorcycl…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos