Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Discover the main instructions for performing the routine maintenance service of the oil change and oil filter on the MV Agusta F4 motorcycle. First, remove the oil drain bolt located under the engine, allowing the oil to drain into a container for about ten minutes; then remove the oil filter cartridge, located near the sump, and replace it with a new one, as shown in the video. Now, unscrew the filler cap and pour in the new engine oil, ensuring it meets the correct specifications.

Updated on 9 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil on a MV Agusta F4 1000 R
How to Change the Engine Oil on a MV Agusta F4 1000 R
F4 1000r In today's tutorial video, you will learn how to change the engine oil and oil filter while performing the routine maintenance service on the MV Agus…
How to Reset the Service Light on the MV Agusta F4 1000
How to Reset the Service Light on the MV Agusta F4 1000
F4 1000r Follow these simple steps to reset the service light for the routine maintenance of the engine oil change on the MV Agusta F4 1000R. First, place the…
How to Replace the Exhaust of the MV Agusta F4 1000R?
How to Replace the Exhaust of the MV Agusta F4 1000R?
F4 1000r To replace the exhaust of the MV Agusta F4 1000R, loosen the screws securing the exhaust at the rear, where it connects to the rear mudguard. Once th…

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos