Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To reset the Service light of the Triumph Thruxton 1200 R, you will need to turn on the instrument panel by inserting the ignition key into the corresponding slot: after turning it on, you will need to connect a diagnostic tool to the motorcycle's OBD port. Once the connection is established, you will need to select the options shown in the video, following the procedure for resetting the Service light exactly; at the end of the procedure, you can disconnect the scanner to check that the light has disappeared from the panel, which can now be turned off.

Posted on 13 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the exhaust of the Triumph Thruxton 1200 R?
How do you replace the exhaust of the Triumph Thruxton 1200 R?
Thruxton 1200 R In order to replace the exhaust pipe of the Triumph Thruxton 1200 R, you need to loosen the screws that secure the exhaust terminal corresponding to …
Replacing the Engine Oil and Oil Filter on the Triumph Thruxton 1200
Replacing the Engine Oil and Oil Filter on the Triumph Thruxton 1200
Thruxton 1200 R In this tutorial, you will learn how to perform routine maintenance by replacing the engine oil and oil filter on the Triumph Thruxton 1200. First, p…
How to replace the motor oil in the Triumph Thruxton 1200 R?
How to replace the motor oil in the Triumph Thruxton 1200 R?
Thruxton 1200 R In this tutorial we can see how to replace the engine oil in the Triumph Thruxton 1200 R, an extremely simple and quick operation. First of all, we w…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos