Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Battery on a Benelli TNT 600i?

Model: Benelli Tnt 600
Part: Battery

Video tutorial

To replace the battery on the Benelli TNT 600i, remove the seat by loosening the screws that hold it in place. Under the seat, you will need to detach a small piston to lift the fairing on top of the fuel tank.

Under this, you will also find the battery, which can be removed after disconnecting the terminals and loosening the mounting bolts. After extracting the old battery, insert the new one into its housing, secure it with the bolts, and connect it to the respective terminals.

Once the replacement is complete, reinstall the fairing and the seat.


Updated on 24 April 2026 by ScegliAuto


Related tutorials

How to Replace the Air Filter of the Benelli TnT 600i?
How to Replace the Air Filter of the Benelli TnT 600i?
Tnt 600 To replace the air filter of the Benelli TnT 600i, loosen the screws securing the seat so that it can be removed. Once the seat is removed, lift the …
How to Replace the Battery of the Benelli TNT 600?
How to Replace the Battery of the Benelli TNT 600?
Tnt 600 To replace the battery of the Benelli TNT 600, loosen the screws securing the seat on the right and left side, then remove it from its housing. Once …
How to Replace the Battery in a Benelli TNT 600
How to Replace the Battery in a Benelli TNT 600
Tnt 600 To replace the battery in the Benelli TNT 600, loosen the screws securing the seat on the left and right sides, then remove it from its position. Onc…

How to Change the Engine Oil of a Harley Davidson Sportster

Changing the engine oil of a Harley Davidson Sportster requires a few simple operations performed with care. Start by positioning the bike securely, preferably using a centre stand or suitable support. Locate the oil drain plug under the engine and place a container to collect the used fluid. After removing the plug, allow the oil to drain completely, waiting a few minutes for all the fluid to be expelled. Once emptied, reinsert the plug and ensure it is tightly screwed in. At this point, locate the oil filler cap, unscrew it, and pour in the recommended quantity and type of oil as specified by the manufacturer. Check the level using the dipstick or built-in indicator, adjusting the quantity if necessary. After finishing, briefly start the engine to allow the oil to circulate, then check the level again to ensure it is correct.

Watch the video!


by ScegliAuto

More videos