Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
As we can see in this tutorial, resetting the oil service on the Honda PCX 160 scooter is an extremely simple and quick operation. Before proceeding, ensure you have completed all required scheduled maintenance tasks. Start by inserting the key and turning on the instrument panel, then press and hold the two buttons located just below the display. Once the clock starts flashing, navigate to the service interval using the right button, reset it with the left button, and verify that the operation was successful by restarting the panel.

Updated on 4 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Oil Service on a Honda PCX 160 Scooter?
How to Reset the Oil Service on a Honda PCX 160 Scooter?
Pcx 160 In this tutorial, see how to reset the oil service on a Honda PCX 160 scooter, an extremely simple and quick operation to be performed only after com…
How to reset the service on the Honda PCX 160 scooter?
How to reset the service on the Honda PCX 160 scooter?
Pcx 160 In this tutorial we can see how to reset the service on the Honda PCX 160 scooter, an extremely simple and quick operation, to be carried out only on…
How to reset the service on the Honda PCX 160 scooter?
How to reset the service on the Honda PCX 160 scooter?
Pcx 160 In this tutorial we can see how to reset the service on the Honda PCX 160 scooter, an extremely simple and quick operation, to be carried out only on…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos