Do it yourself
Frequently asked questions about cars and motorcycles

Model: Bmw K1600
Part: Fuel injectors

It will be possible to replace the injectors of the BMW K1600 by loosening the screws that secure the paneling in the front lower part of the vehicle, immediately behind the front wheel: once the panel is removed, it will be possible to proceed by loosening the screws that secure the bulky components such as the radiator. Once the radiator is removed, it will be possible to proceed by loosening the screws that secure the injectors to the top of the engine block: now it will be necessary to disconnect the appropriate tubes so that the injectors can be removed and replaced with new ones.

Posted on 24 April 2025 by ScegliAuto

Video tutorial

Related tutorials

K1600 The procedure for replacing the engine oil on the BMW K1600 is carried out by loosening the drain plug of the engine oil pan: this drain plug is loca…
K1600 To replace the windscreen on a BMW K1600, you need to loosen the screws that secure it to its housing: there are six screws located at the lower side…
K1600 In order to replace the battery of the BMW K1600, you need to loosen the screws that secure the motorcycle seat to its housing, so that you can acces…

How to Remove the Engine from a KTM EXC 300?

To remove the engine from the KTM EXC 300, you need to take out the engine block from its housing by unscrewing the bolts that secure it to the supports. Once the engine block is removed, unscrew the bolts that secure the cylinder at the top, then proceed to remove the side casings. Underneath, you will find the piston and other internal components, such as the clutch. The necessary parts can now be replaced, and you can subsequently reassemble all the components that were removed earlier.

Watch the video!


by ScegliAuto

More videos