Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Bmw K1300
Part: Engine oil

In this tutorial, we will see how to replace the engine oil in the BMW K1300, an operation that is extremely simple and quick. First of all, let's make sure that the engine is cool enough. Then, we position a container underneath it, locate the drain hole bolt, and unscrew it using an 8mm hex key. Next, we open the seat, disconnect the indicated hose, and let all the oil contained in the system drain out. At this point, all that’s left to do is unscrew the old filter, tighten the replacement, reassemble everything, and add the necessary amount of oil through the designated upper hole.

Posted on 9 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to replace the handles of the BMW K1300
How to replace the handles of the BMW K1300
K1300 The following steps will illustrate the procedure for disassembling and replacing the handles of the BMW K1300 motorcycle. First of all, we put the m…
How to Replace the Fuel Tank on a BMW K1300
How to Replace the Fuel Tank on a BMW K1300
K1300 Below are the instructions to remove and replace the fuel tank on the BMW K1300 motorcycle. First, place the bike on the centre stand and begin by re…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos