Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
The procedure to reset the oil light on the Yamaha Xmax 250 involves inserting the ignition key into the appropriate slot so that the instrument panel can be turned on. Once this is done, you will need to press and hold the central button located on the left side of the instrument panel for about 20 seconds. When released, you will see that the flashing oil light has turned off. To verify that the reset was successful, you will need to turn off and turn on the instrument panel again.

Posted on 17 February 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Yamaha Xmax 250?
How to Reset the Service Light on the Yamaha Xmax 250?
Xmax 250 To reset the Service light on the Yamaha Xmax 250, insert the ignition key into the ignition switch to power up the instrument cluster. Once powered …
How to Reset the Oil Service Light on a Yamaha Xmax 250
How to Reset the Oil Service Light on a Yamaha Xmax 250
Xmax 250 The procedure to reset the Oil Service light on a Yamaha Xmax 250 involves turning on the instrument panel by inserting the ignition key into the ign…
How to Reset the Oil Service Light on the Yamaha Xmax 250?
How to Reset the Oil Service Light on the Yamaha Xmax 250?
Xmax 250 To reset the Oil Service light on the Yamaha Xmax 250, first turn on the instrument panel by turning the key in the ignition switch. Once the panel i…

How to Turn Off the "V-Belt" Warning Light on a Yamaha X-MAX 400 Scooter?

In this tutorial, learn how to turn off the "V-Belt" warning light on the Yamaha X-MAX scooter's instrument panel, a very simple and quick operation. Before doing this, ensure you have completed the required maintenance, specifically replacing the drive belt. Start by inserting the key and turning on the ignition, then open the small right glove compartment and unscrew the screw for the upper cover. Once removed, locate the white connector with a jumper attached, disconnect it, wait about 10 seconds, and reconnect it. If successful, the warning light will disappear.

Watch the video!


by ScegliAuto

More videos