Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the coolant on a Kawasaki Z750

Model: Kawasaki Z750
Part: Antifreeze coolant

Video tutorial

Make sure the motorcycle is cold before starting. Place the motorcycle on a stand to ensure stability.

Remove the passenger seat and then the driver's seat. Unscrew the fuel tank mounting screws, disconnecting the pipe and electrical connector to remove it. Disconnect the radiator hose to drain the fluid into a container.

Unscrew the filler cap to facilitate emptying. Once the old liquid is completely drained, close the radiator hose.

Fill the radiator with the new coolant up to the recommended level. Start the motorcycle to circulate the new liquid and remove air from the system.

Check the liquid level and add if necessary. Make sure all components are properly secured.

Reassemble the fuel tank and seats. Remember to use the recommended type of coolant for your motorcycle and follow the specific instructions in your Kawasaki Z750 manual.


Posted on 17 February 2025 by ScegliAuto


Related tutorials

Replacing the Coolant on a Kawasaki Z750
Replacing the Coolant on a Kawasaki Z750
Z750 In this brief and simple guide, you will learn how to bleed and replace the coolant on a Kawasaki Z750 motorcycle. First, place your motorcycle on a …
How to Replace the Coolant in the Kawasaki Z750
How to Replace the Coolant in the Kawasaki Z750
Z750 Follow the steps below to replace the coolant in the Kawasaki Z750. First, place your bike on a stand and remove the passenger seat, followed by the …
How to Top Up the Coolant in the Kawasaki Z750
How to Top Up the Coolant in the Kawasaki Z750
Z750 Follow the steps below to top up the coolant in your Kawasaki Z750 motorcycle. First, place the bike on a stand and remove the passenger seat. Next, …

How to Change the Engine Oil in a Triumph Speed Triple

In this tutorial, we will see how to change the engine oil in a Triumph Speed Triple, a very simple and quick operation. First, ensure that the engine is cool enough to operate safely, then position a container underneath the bike, locate the drain plug, and unscrew it using a socket wrench. Allow all the oil in the system to drain out, unscrew the old filter, and tighten both the replacement and the plug. At this point, simply pour the necessary amount of oil through the designated upper hole.

Watch the video!


by ScegliAuto

More videos