Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this brief and simple guide, you will learn how to bleed and replace the coolant on a Kawasaki Z750 motorcycle. First, place your motorcycle on a stand and start unscrewing the bleed screw located on the water pump casing; allow all the coolant to drain into a container for about ten minutes, as shown in the video. At this point, unscrew the radiator cap and top up with the new fluid (suitable for your radiator); simply fill it up to the maximum level!

Updated on 23 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Top Up the Coolant in the Kawasaki Z750
How to Top Up the Coolant in the Kawasaki Z750
Z750 Follow the steps below to top up the coolant in your Kawasaki Z750 motorcycle. First, place the bike on a stand and remove the passenger seat. Next, …
How to Replace the Coolant in the Kawasaki Z750
How to Replace the Coolant in the Kawasaki Z750
Z750 Follow the steps below to replace the coolant in the Kawasaki Z750. First, place your bike on a stand and remove the passenger seat, followed by the …
Replacing the Battery of the Kawasaki Z750
Replacing the Battery of the Kawasaki Z750
Z750 This guide provides the main instructions to remove and replace the battery of the Kawasaki Z750 motorcycle. First, remove the passenger seat, follow…

How to Replace the Rear Mudguard on the Ducati Monster 696?

In this tutorial, see how to replace the rear mudguard on the Ducati Monster 696, a very simple and quick operation. First, remove the seat, then temporarily disconnect the exhaust silencer to gain working space. Next, locate the four fixing bolts of the mudguard, loosen them using an Allen key, and separate the mudguard from the frame. At this point, disconnect the rear light connector, attach the replacement, and reassemble everything by following the procedure in reverse.

Watch the video!


by ScegliAuto

More videos