Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing Engine Oil and Oil Filter on BMW K75

Model: Bmw K75
Part: Engine oil

Video tutorial

Descriptive guide for replacing the engine oil and oil filter on a BMW K75. Obtain 4 litres of Bardahl XTC C60 20W50 oil, a copper washer with an inner diameter of 18.5mm, an HIFLO HF163 oil filter, and a 76mm Mahle oil filter wrench. Position the bike on its centre stand.

Start the engine, allow it to reach temperature, and then turn it off. Place a container for the used oil under the engine. From the right side of the bike, unscrew the oil plug located under the engine using a ratchet and a 9mm Allen socket.

Allow the oil to drain and clean the plug thoroughly. To access the oil filter, unscrew the round cover with a 6mm Allen socket.

Using the cup wrench, unscrew the oil filter located inside. Lubricate the seal of the new filter with oil and screw it on. Screw the oil drain plug back in with the new copper washer.

Unscrew the oil filler cap located on the oil tank on the right side, front fairing. Pour in the oil using a small funnel (the manufacturer states oil and filter require 3.75 litres).


Updated on 9 March 2026 by ScegliAuto


Related tutorials

How to Replace the Front Fork Oil on the BMW K75
How to Replace the Front Fork Oil on the BMW K75
K75 To replace the front fork oil on the BMW K75, you need to loosen the drain plug located at the bottom of the fork, near the brake disc: once the plug…
How to Replace the Air Filter on a BMW K75?
How to Replace the Air Filter on a BMW K75?
K75 To replace the air filter on a BMW K75, loosen the screws that secure the cover of the filter box; once located at the bottom of the seat, lift the c…
How to Replace the Air Filter on the BMW K75?
How to Replace the Air Filter on the BMW K75?
K75 To replace the air filter on the BMW K75, loosen the screws securing the air filter box to its housing, which is located directly beneath the fuel ta…

How to Clean the Throttle Body on a Piaggio Beverly

In today's video, see how to clean the throttle body on a Piaggio Beverly. This operation applies to all models of the Beverly from 125 to 500 over various years. First, remember to work only with a cold engine to avoid unpleasant burns. Next, remove the seat by unscrewing the appropriate fastening clips. Once done, proceed to remove the scooter's body; find and remove the appropriate fastening clips. At this point, you can carry out the work in question and then reassemble everything as it was.

Watch the video!


by ScegliAuto

More videos