|
Do it yourself
| |||
| ||||
Video tutorial
To adjust the valves on the BMW K75, loosen the screws that secure the valve cover located on the left side of the bike. Once these screws are loosened, use a feeler gauge to adjust the valve clearance. Consult the vehicle's user and maintenance manual for the correct clearance settings. Once the adjustment is complete, reinstall the valve cover. After the adjustment, check that everything is functioning correctly.
Updated on 6 October 2026 by ScegliAuto
Related tutorials
K75
To replace the clutch cable on a BMW K75, you need to loosen the bolts securing its ends: the first end is located near the left lever on the handleb…
K75
To replace the air filter on a BMW K75, loosen the screws that secure the cover of the filter box; once located at the bottom of the seat, lift the c…
K75
To replace the front fork oil on the BMW K75, you need to loosen the drain plug located at the bottom of the fork, near the brake disc: once the plug…
|
How to Clean the Throttle Body on a Piaggio Beverly
In today's video, see how to clean the throttle body on a Piaggio Beverly. This operation applies to all models of the Beverly from 125 to 500 over various years. First, remember to work only with a cold engine to avoid unpleasant burns. Next, remove the seat by unscrewing the appropriate fastening clips. Once done, proceed to remove the scooter's body; find and remove the appropriate fastening clips. At this point, you can carry out the work in question and then reassemble everything as it was. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.084
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
