Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

What is the fuse layout of the BMW 5 Series?

Model: BMW Serie 5 F11, F10 - Years 2010-2017
Part: Fuse box

If some devices in our BMW 5 Series have suddenly stopped working, we can first of all check the status of the corresponding fuses, whose diagrams are indicated in this video. We find the first box inside the passenger compartment, precisely behind the cover located at the bottom of the glove compartment. The second box is instead located on the right wall of the trunk. In case of a blown fuse, make sure to use a replacement with equivalent specifications and always operate with the vehicle turned off, so as not to cause any damage to the connected devices.

Posted on 25 July 2025 by ScegliAuto

Video tutorial

Related tutorials

Fuse box layout and positioning of the BMW 5 Series
Fuse box layout and positioning of the BMW 5 Series
BMW Serie 5 (2003-2010 / E61, E60) In this brief guide, we will see the positioning and layout of the fuse boxes of the BMW 5 Series, following the instructions below. First, we open t…
Fuse box layout and positioning of the BMW 5 Series.
Fuse box layout and positioning of the BMW 5 Series.
BMW Serie 5 (2010-2017 / F11, F10) These brief and simple instructions will show us the layout and positioning of the fuse boxes of the BMW 5 Series. First, we open the front right doo…
Layout and positioning of the fuses in the BMW 5 Series.
Layout and positioning of the fuses in the BMW 5 Series.
BMW Serie 5 (2010-2017 / F11, F10) In this guide we will see the layout and positioning of the fuse boxes of the BMW 5 Series. First, we open the hood of the car and start removing the…

    Frequently Asked Questions

    • Serie 5 2003-2010 - Where is the license plate light fuse located on the BMW 5 Series? Read answer

How to Remove the Headrests from a Fiat Panda

Below are the instructions to remove the headrests, both front and rear, from the Fiat Panda. First, get inside the vehicle and press and hold the side button located at the base of the headrest. Then, while holding the button, pull the headrest upwards to remove it, as shown in the video. At this point, perform the same operation on the other headrests. Now, simply insert them back in while holding the button, and finally adjust the height of all the headrests!

Watch the video!


by ScegliAuto

More videos