Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. BMW
    3. :
  3. Serie 5
    4. : How to remove the door panel molding on BMW 5 Series f10

BMW Serie 5 - Video tutorial

Model: BMW Serie 5 F11, F10 - Years 2010-2017
Part: Door panel
Operation: How to remove the door panel molding on BMW 5 Series f10

On the door panel of this BMW model, on the upper band, immediately under the window seat, there is an insert, a molding, covered with a briar effect band and under an aluminum insert; this molding is fixed to the panel by means of pressure fasteners: it is therefore sufficient to lever along the edges to be able to release it and extract it from its seat; it is advisable to use a plastic lever to avoid generating dents even if in reality, already using the fingertips, under the band, it is possible to pull it to be able to release it.


Posted on 29 September 2023 by ScegliAuto



Removing the front door panel on BMW 5 Series F10 - F11
BMW Serie 5 (2010-2017 / F11, F10) Let's see in this video how to remove the front door panel on a BMW 5 Series F10 and F11, following the instructions below. First we open the front d
How do you remove the BMW 5 Series door panel?
BMW Serie 5 (2010-2017 / F11, F10) To be able to remove the door panel from the BMW 5 Series you need to pry with an object so that you can detach the molding positioned in the upper p
How do you replace the external rearview mirror of the BMW 5 Series?
BMW Serie 5 (2010-2017 / F11, F10) In order to replace the external rearview mirror of the BMW 5 Series, you need to first remove the door panel: to do this, you will need to pry it wi

Other guides that may interest you

    Frequently Asked Questions

    • Serie 5 2010-2017 - How do you remove the door panel on the BMW 5 Series? Read Answer

Fiat Ducato 2.8 JTD gearbox oil replacement

Let's see in this guide the main steps to be able to change the transmission oil of the second series Fiat Ducato, with 2.8 JTD engine. First of all we lift the car and go to locate the gear oil vent bolt, which we find near the transmission; we use a hex wrench to unscrew it, letting it drain the old oil in a container for about ten minutes. At this point we open the bonnet and remove the air intake sleeve, so as to be able to access the gearbox oil filling hole; then we fill up to the maximum level!

Watch the video!


by ScegliAuto

More videos