Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

Chevrolet Sonic - Key

Chevrolet Sonic (2012-2020 / T300)
How to replace the battery in the key of a Chevrolet Sonic.
If we have noticed that the remote control key for our car is not working, it is probably necessary to replace the internal battery. To do this, we will find …read all…
Posted on 29 April 2023 by ScegliAuto
Chevrolet Sonic (2012-2020 / T300)
How to replace the battery of the Chevrolet Sonic remote control?
In this tutorial we can see how to change the battery of the Chevrolet Sonic remote control, an extremely simple operation. To do this, we will need a spare …read all…
Posted on 3 June 2023 by ScegliAuto
Chevrolet Sonic (2012-2020 / T300)
How to replace the key battery on the Chevrolet Sonic
If you are looking for a guide to help you replace the battery in your Chevrolet Sonic key then just read the steps described below carefully. Fortunately, …read all…
Posted on 20 May 2023 by ScegliAuto
Chevrolet Sonic (2012-2020 / T300)
How to replace the key battery in the Chevrolet Sonic
In this new guide of ours dedicated to all of you owners of a 2019 Chevrolet Sonic, we are going to describe all the various steps necessary to be able to …read all…
Posted on 1 May 2023 by ScegliAuto
Antenna (1) Car stereo (1) Battery (1) Spark plugs (1) Key (4) Air conditioning (1) -board computer (1) Dashboard (1) Air filter (1) Cabin air filter (2) Headlight bulb (1) Gear oil (1) Front bumper (1) Instrument cluster (1) Windscreen wipers (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos