Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C4 Picasso
    4. : Particulate filter

Citroen C4 Picasso - Particulate filter

Citroen C4 Picasso (2004-2010 / )
Removal and thorough cleaning of the particulate filter
After removing the particulate filter, it is necessary to carry out a thorough cleaning. Using a hose, immerse the filter in a basin full of water and run the …read all…
Posted on 21 June 2023 by ScegliAuto
Airbags (1) Shock absorbers (2) Car stereo (11) Battery (23) Glow plugs (2) Bodywork (3) Glove box (1) Key (14) Timing belt (2) Air conditioning (1) Air conditioning controls (1) -board computer (12) Checks and maintenance (63) Dashboard (7) Gearshift gaiter (1) Brake discs (2) Rear bench seat (1) Headlight (6) Tail light (5) Fog lights (2) Particulate filter (1) Air filter (2) Cabin air filter (10) Diesel filter (4) Hand brake (5) Clutch (2) Injectors (3) Window lift switch (1) Side turn signal light bulb (1) Headlight bulb (13) Rear light bulb (6) Dashboard light (1) License plate light (4) Handle (1) Gear oil (2) Engine oil (5) Door panel (5) Windshield (2) Front bumper (4) Brake pads (5) Tires (4) Gear Shift Knob (1) Pump (1) Door (3) Window lift button (1) Instrument cluster (13) Passenger compartment heating radiator (2) Wheel (5) Fuse box (26) Seat (7) Lock (1) Outside rearview mirror (6) Windscreen wipers (4) Interior blower (5) Steering wheel (3)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos