Do it yourself
Frequently asked questions about cars and motorcycles

Citroen C4 Picasso - Door

Citroen C4 Picasso (2006-2013 / MK 1)
How to disassemble the rear door of the Citroen C4 Picasso

Today we will see the instructions that will allow us to disassemble and replace the rear door of the Citroen C4 Picasso. First of all, we open the front door …read all…
Posted on 4 May 2024 by ScegliAuto
Citroen C4 Picasso (2006-2013 / MK 1)
How to replace the rear handle of the Citroen C4 Picasso.

Replacing the tailgate opening switch on a Citroen C4 Picasso requires some basic mechanical skills and can be done by following the following general steps: …read all…
Posted on 8 February 2024 by ScegliAuto
Citroen C4 Picasso (2006-2013 / MK 1)
How to remove the driver's door panel on a Citroen C4 Picasso?

In this tutorial, we can see how to disassemble the driver's door on a Citroen C4 Picasso, which is a very simple and fast operation. We start by opening the …read all…
Posted on 16 June 2023 by ScegliAuto

Airbags (1) Shock absorbers (2) Car stereo (11) Battery (23) Glow plugs (2) Bodywork (3) Glove box (1) Key (14) Timing belt (2) Air conditioning (1) Air conditioning controls (1) -board computer (12) Checks and maintenance (63) Dashboard (7) Gearshift gaiter (1) Brake discs (2) Rear bench seat (1) Headlight (6) Tail light (5) Fog lights (2) Particulate filter (1) Air filter (2) Cabin air filter (10) Diesel filter (4) Hand brake (5) Clutch (2) Injectors (3) Window lift switch (1) Side turn signal light bulb (1) Headlight bulb (13) Rear light bulb (6) Dashboard light (1) License plate light (4) Handle (1) Gear oil (2) Engine oil (5) Door panel (5) Windshield (2) Front bumper (4) Brake pads (5) Tires (4) Gear Shift Knob (1) Pump (1) Door (3) Window lift button (1) Instrument cluster (13) Passenger compartment heating radiator (2) Wheel (5) Fuse box (26) Seat (7) Lock (1) Outside rearview mirror (6) Windscreen wipers (4) Interior blower (5) Steering wheel (3)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos