Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C5 Aircross
    4. : Instrument cluster

Citroen C5 Aircross - Instrument cluster

Citroen C5 Aircross (2017-2022 / MK 1)
How to reset the service indicator of the Citroen C5
Below we will discover together how to correctly perform the manual reset of the service light of your first series Citroen C5 Aircross. First of all, get into …read all…
Posted on 1 April 2024 by ScegliAuto
Citroen C5 Aircross (2017-2022 / MK 1)
How to reset the service indicator of the Citroen C5 Aircross 2017
The manual reset procedure for the service light of your 2017 Citroen C5 Aircross only takes a few seconds to complete, and thanks to the following guide, you …read all…
Posted on 19 March 2024 by ScegliAuto
Citroen C5 Aircross (2017-2022 / MK 1)
Instrument panel of the Citroen C5 Aircross
In this video we see in detail the instrument panel of the Citroen C5 Aircross; the graphics can be adapted in various display modes, both analog and digital, …read all…
Posted on 9 March 2024 by ScegliAuto
Citroen C5 Aircross (2017-2022 / MK 1)
How to reset TPMS on Citroen C5
In the event that we notice that the low tire pressure warning light comes on on our instrument panel, we must immediately proceed to check the actual pressure …read all…
Posted on 26 April 2023 by ScegliAuto
Key (1) -board computer (6) Checks and maintenance (7) Air filter (1) Cabin air filter (4) Tires (2) Instrument cluster (4) Fuse box (1)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos