Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C6
    4. : Fuse box

Citroen C6 - Fuse box

Citroen C6 (2005-2012 / MK 1)
What is the fuse layout of the Citroen C6?
If the devices of our Citroen C6 have suddenly stopped working, we can first of all check the status of the related fuses whose diagrams are indicated in this …read all…
Posted on 3 March 2024 by ScegliAuto
Citroen C6 (2005-2012 / MK 1)
What is the fuse layout of the Citroen C6?
In this video we can see where the fuse boxes of the Citroen C6 are located and what are the respective diagrams, to consult in case we need to check the fuses …read all…
Posted on 1 March 2024 by ScegliAuto
Citroen C6 (2005-2012 / MK 1)
Where is the internal fuse box located in the Citroen C6 2009?
To be able to locate the internal fuse box of your 2009 Citroen C6 on your own, all you have to do is pay attention to the following guide and follow the steps …read all…
Posted on 29 July 2023 by ScegliAuto
Citroen C6 (2005-2012 / MK 1)
Citroen C6 fuse box
On this car model of the French house there are two fuse boxes, the first is placed in the engine compartment on the left side above the battery and the second …read all…
Posted on 1 May 2023 by ScegliAuto
Front bumper (1) Gear Shift Knob (1) Instrument cluster (1) Fuse box (4)

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos