Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the Citroen Nemo.

Model: Citroen Nemo MK 1 - Years 2007-2017
Part: Service warning light

Let's see in this video how to reset the service light on a Citroen Nemo: of course, when we get inside, we need to make sure that the doors, the rear hatch, and the front hood are properly closed. Then, we will repeatedly press the menu selection button until the "trip" function is highlighted on the multifunction display, which is located in the center of the dial. Next, press the button again until we see the total mileage highlighted. Now, press and hold the phone call accept button for one second, and then press the "OK" button for five seconds. Press the button until we reach "assyst plus" and then "full service." Press the "OK" button repeatedly until the menu is exited. Finally, turn off the ignition and turn it back on to check that the light has turned off.

Posted on 25 December 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service Light on the Citroen Nemo?
How to Reset the Service Light on the Citroen Nemo?
Citroen Nemo (2007-2017 / MK 1) In this tutorial, see how to reset the service light on the Citroen Nemo, an extremely simple and quick operation to perform only after completing al…
How do you reset the Service light on the Citroën Nemo?
How do you reset the Service light on the Citroën Nemo?
Citroen Nemo (2007-2017 / MK 1) In order to reset the Service light of the Citroën Nemo, you need to connect a diagnostic tool to the OBD port of the vehicle: this port is located o…
How to Reset the Oil Light of the Citroen Nemo
How to Reset the Oil Light of the Citroen Nemo
Citroen Nemo (2007-2017 / MK 1) The manual reset procedure for the oil light of your Citroen Nemo (year 2008-2020) requires performing a few simple steps that we will discover below…

How to Open a Stuck Boot on the Peugeot 407?

On the Peugeot 407, the boot may become stuck, possibly due to a problem with the control button or the lock actuator. In such cases, you can perform an emergency opening by following the simple procedure shown in this tutorial. First, open the rear doors, then lower the seat back by operating the release lever. Next, go inside the boot, locate the lock, and manually operate it using a flathead screwdriver. The boot will then be free to open.

Watch the video!


by ScegliAuto

More videos