Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Front Bulb on Citroen C1

Model: Citroen C1 MK 1 - Years 2005-2014
Part: Headlight bulb

Turn off the car, pull the handbrake, open the bonnet, and use the support rod. Remove the cover located behind the affected bulb. Disconnect the connector from the bulb, remembering to pull from the connector itself and not the wires (as you risk damaging them otherwise). At this point, simply unscrew the bulb slightly to remove it from its socket. Insert the new bulb you purchased, which is equivalent to the one removed, and screw it in lightly to ensure it is properly positioned. Reconnect the connector and reassemble the rear cover of the bulb.

Updated on 2 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Remove and Replace the Boot Seal on the Citroen C1
Remove and Replace the Boot Seal on the Citroen C1
Citroen C1 (2005-2014 / MK 1) In this video tutorial, follow the procedure to remove and replace the boot seal on the first series Citroen C1, as well as the Peugeot 107 and Toyot…
Replacing the External Mirror on Citroen C1
Replacing the External Mirror on Citroen C1
Citroen C1 (2014-2022 / MK 2) Replacing the mirror on a Citroen C1 is very simple. To remove the old and possibly broken mirror, use a plastic trim tool and lever it at the bottom…
How to Change Third Brake Light Bulb on Citroen C1
How to Change Third Brake Light Bulb on Citroen C1
Citroen C1 (2005-2014 / MK 1) Replace the blown bulbs in the third brake light of a Citroen C1. Unscrew the plastic cover to access the third brake light. Remove the protective pl…

How to Bleed the Clutch on a Renault Clio?

To bleed the clutch on a Renault Clio, open the bonnet to access the components located in the engine bay: here, you will need to undo the screws that secure the battery in its housing, the intake manifold, and the coolant reservoir. This will allow you to locate the pipe through which the brake fluid flows: by inserting the other end of the pipe into a container, you can press the clutch pedal to expel all the fluid until it fills the container.

Watch the video!


by ScegliAuto

More videos