Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C3
    4. : How to reset the TPMS on the Citroen C3?

Citroen C3 - Video tutorial

Model: Citroen C3 SC - Years 2009-2016
Part: -board computer
Operation: How to reset the TPMS on the Citroen C3?

If we have to turn off the low tire pressure warning light on the car, it is necessary to follow the instructions below: first of all, it is necessary to check the pressures of all four tires and proceed to restore the correct pressures provided by the manufacturer (see manual use and maintenance). Then access the driver's seat, turn on the ignition and press the "menu" button on the radio controls and scroll through the various functions with the arrows until you reach the configuration menu, then select the "driving assistance" item and the item "tire pressure" will be highlighted, then press "ok" twice to update the new pressures.


Posted on 7 May 2024 by ScegliAuto

    Frequently Asked Questions

    • C3 2009-2016 - Why doesn't the Citroen C3's START&STOP work? Read Answer
    • C3 2016-2023 - Why does the AdBlue warning light on the Citroen C3 stay on even after refueling? Read Answer
    • C3 2016-2023 - Why did the Citroen C3 service light come on? Read Answer
    • C3 2002-2009 - Why is the on-board computer of the Citroà «n C3 not working? Read Answer
    • C3 2009-2016 - What does the yellow tire warning light on the Citroen C3 mean? Read Answer
    • C3 2009-2016 - How to reset the service warning light in a Citroen C3? Read Answer
    • C3 2009-2016 - Why does the on-board computer in C3 not turn on? Read Answer
    • C3 2009-2016 - What does the orange warning light mean on Citroen C3? Read Answer
    • C3 2016-2023 - Why does the on-board computer of a Citroen C3 not work? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos