Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Replacing the Oil Pressure Sender on a Citroen C3

Model: Citroen C3 FC, FN - Years 2002-2009

This brief guide shows how to remove and replace the oil pressure sender on a Citroen C3, following the instructions below. First, open the bonnet and locate the oil pressure sender, situated low under the intake hose. Disconnect the electrical connector from the sender and use a socket to unscrew and remove the sender. Now, replace it with the new one, using the original part, screwing it in by hand before tightening with a socket; finally, reconnect the electrical connector.

Updated on 31 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Oil and Filter on a Citroen C3
How to Change the Oil and Filter on a Citroen C3
Citroen C3 (2016-2023 / SY, SX) The video provided contains detailed instructions for replacing the engine oil and its corresponding filter in Citroen C3 vehicles. This guide is als…
Guide to replacing the oil pump of the Citroen C3 1.2 VTI
Guide to replacing the oil pump of the Citroen C3 1.2 VTI
Citroen C3 (2009-2016 / SC) Today's guide will show you the main steps to remove and replace the faulty oil pump of the Citroen C3 1.2 VTI. The oil pump replacement operation is…
How to replace the number plate lights on the Citroën C3
How to replace the number plate lights on the Citroën C3
Citroen C3 (2009-2016 / SC) Today's guide will show you the steps to remove and replace the number plate bulbs on the Citroën C3. First, move to the rear of the vehicle and star…

How to Connect the Cables to the Battery of the Citroen Xsara Picasso?

In this tutorial, you will see how to connect the cables to the battery of the Citroen Xsara Picasso, useful if you need to recharge it or perform an emergency start. First, ensure the key is not inserted, then open the bonnet and move to the front of the left headlamp. Next, locate the bolt just behind the filter box and connect the positive terminal clamp to it. Now you can connect the negative terminal to any point on the chassis, such as the indicated point. Once the operation is complete, ensure you disconnect the negative first and then the positive.

Watch the video!


by ScegliAuto

More videos