Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Car
    2. :
  2. Citroen
    3. :
  3. C3
    4. : Citroen C3 1.4i temperature sensor replacement guide

Citroen C3 - Video tutorial

Model: Citroen C3 FN, FC - Years 2002-2009
Part: Coolant temperature sensor
Operation: Citroen C3 1.4i temperature sensor replacement guide

In this short and simple guide we will see the instructions necessary to disassemble and replace the coolant temperature sensor of the Citroen C3 1.4i. First of all, we open the bonnet and begin to locate our temperature sensor, which we find on the upper part of the engine block; then we disconnect its electrical connector and unscrew the sensor with a wrench to remove it. At this point we check that the wiring of the thermostat to the cooling fan is in good condition; let's install the new temperature sensor again!


Posted on 3 May 2023 by ScegliAuto

Other guides that may interest you

    Frequently Asked Questions

    • C3 2009-2016 - Why is the temperature sensor of the Citroen C3 not working? Read Answer

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos