Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the coolant temperature sensor on a Citroen C3

Model: Citroen C3 FC, FN - Years 2002-2009
Part: Engine coolant temperature sensor

Before you start, open the front bonnet of your Citroen C3. The sensor is located near the left side of the cylinder head. This procedure should be carried out with the engine cold. Start by disconnecting the upper connector that powers the sensor. Once done, unclip and remove the clip that secures the sensor. After removing the clip, you will have freed the sensor. At this point, extract the sensor from its housing. Once this last step is complete, the disassembly will be finished.

Updated on 5 April 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the ABS Sensor on a Citroen C3
How to Remove the ABS Sensor on a Citroen C3
Citroen C3 (2002-2009 / FC, FN) How to remove the ABS sensor on a Citroen C3? Position your car on a column lift and raise it to a comfortable height for working. Unscrew the wheel …
How to Remove the Steering Wheel of a Citroen C3
How to Remove the Steering Wheel of a Citroen C3
Citroen C3 (2002-2009 / FC, FN) How to remove the steering wheel of a Citroen C3 with the airbag? In this video, follow these steps: before removing the steering wheel, disconnect t…
How to Remove the Cabin Filter on a Citroen C3
How to Remove the Cabin Filter on a Citroen C3
Citroen C3 (2002-2009 / FC, FN) How to remove the cabin filter on a Citroen C3? Follow these steps. Use a plastic lever to detach the trim located in the engine bay (bottom of the w…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos