Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Citroen C3: how to replace the valve cover gasket.

Model: Citroen C3 FC, FN - Years: 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Part: Cylinder head

See other generations:
Video tutorial

To change the valve cover gasket on a Citroen C3, open the hood and secure the vehicle with the engine cold. Clear access to the top of the engine by disconnecting the electrical connectors and hoses on the cover, particularly the vapor breather and the ignition coil wiring, moving them aside without pulling.

Using a socket wrench, remove all the fastening screws of the valve cover and gently lift it off. Take out the old gasket from the cover seat, then thoroughly clean both the groove of the cover and the mating surface on the cylinder head, removing any oil or dirt residue with a clean cloth.

Insert the new gasket into its seat, ensuring it is positioned correctly along the entire perimeter.

Place the cover back onto the cylinder head, hand-tighten the screws, and then evenly tighten them in a crisscross pattern to achieve a proper seal. Reconnect the previously removed breathers, connectors, and wiring, placing each component back in its position.

Start the engine and check for any oil leaks around the cover: if the perimeter remains dry, the gasket replacement on the Citroen C3 is successfully completed.


Posted on 23 November 2025 by ScegliAuto


Related tutorials

How to Replace the Rocker Cover Gasket on a Citroen C3 1.4 Petrol
How to Replace the Rocker Cover Gasket on a Citroen C3 1.4 Petrol
Citroen C3 (2002-2009 / FC, FN) In this tutorial, you will see how to replace the rocker cover gasket on a Citroen C3 1.4 petrol, a very simple operation. First, ensure that the eng…
How to Replace the Valve Cover Gasket on a Citroën C3?
How to Replace the Valve Cover Gasket on a Citroën C3?
Citroen C3 (2002-2009 / FC, FN) To replace the valve cover gasket on a Citroën C3, open the bonnet to access the top of the engine block. Here, disconnect the injector connectors an…
How to Replace the Cylinder Head Gasket on the Citroën C3
How to Replace the Cylinder Head Gasket on the Citroën C3
Citroen C3 (2002-2009 / FC, FN) To replace the cylinder head gasket on the Citroën C3, open the bonnet to access the components inside the engine bay. You will need to detach the pl…

Other guides you may be interested in

How to Remove the Rear Seat of a Hyundai Tucson?

To remove the rear seat of a Hyundai Tucson, follow these steps. Start by moving the front seats to their most forward position to gain space. Next, locate the release lever on the underside of the rear seat, near the floor. Press this lever down while pulling the seat upwards to unlock it from the anchor pins. Once unlocked, tilt the seat upwards and forwards to remove it from its position. Repeat this process for both sides of the rear seat. Be careful of any electrical cables or components that may be connected to the seat during removal. Once the rear seat is removed, the disassembly is complete.

Watch the video!


by ScegliAuto

More videos