Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Guide to Removing the Door Panel on the Citroen C3

Model: Citroen C3 SY, SX - Years 2016-2023
Part: Door trim panel

In this short and simple guide, you will see the instructions that will allow you to remove and replace the front door panel, which also applies to the rear one, on the Citroen C3. First, open the door and start by removing the small plastic cover found on the side of the handle, using something thin; then unscrew the screws located underneath using a Torx screwdriver, as shown in the video. At this point, gently pry at the sides of the panel to detach and remove it, applying the reverse procedure for reassembly!

Updated on 23 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Door Panel of a 2007 Citroen C3
How to Remove the Door Panel of a 2007 Citroen C3
Citroen C3 (2002-2009 / FC, FN) Removing the door panel of a 2007 Citroen C3 follows a procedure that can be done independently. First, open the door and then proceed to remove the …
How to Replace the External Wing Mirror of the Citroen C3
How to Replace the External Wing Mirror of the Citroen C3
Citroen C3 (2009-2016 / SC) Discover in this brief and simple guide the procedure to remove and replace the external wing mirror of the Citroen C3. First, open the front door an…
How to Remove the Door Panel on a Citroen C3 MK1
How to Remove the Door Panel on a Citroen C3 MK1
Citroen C3 (2002-2009 / FC, FN) In this video tutorial, you will learn how to remove the front door panel on a first-generation Citroen C3 by following these simple steps. First, op…

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos