Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Service Reset on Citroen C3

Model: Citroen C3 SC - Years: 2009, 2010, 2011, 2012, 2013, 2014, 2015, 2016
Part: Warning light – error code

See other generations:
Video tutorial

Have you performed a service on your Citroen C3 (2009-2016) but the service light is still on? Don’t worry, in this tutorial you will see the exact procedure to reset this light in a few simple steps. First, press and hold the "ODO" button, located on the right side of the speedometer, then turn on the ignition without starting the engine.

Once done, a countdown will appear on the information display, so continue to hold the "ODO" button until the timer runs out to complete the reset.


Updated on 1 October 2026 by ScegliAuto


Related tutorials

How to reset the service light on the Citroen C3
How to reset the service light on the Citroen C3
Citroen C3 (2016-2023 / SY, SX) The reset of the service light on the Citroen C3 vehicle follows the same procedure as resetting the light related to the maintenance of Peugeot vehi…
How to Reset the Service Light on the Citroen C3
How to Reset the Service Light on the Citroen C3
Citroen C3 (2002-2009 / FC, FN) To manually reset the service light that remains illuminated on the dashboard of your first-generation Citroen C3, follow all the steps outlined in t…
How to Reset the Service Light of the Citroën C3?
How to Reset the Service Light of the Citroën C3?
Citroen C3 (2009-2016 / SC) To reset the Service light of the Citroën C3, press and hold the button located at the bottom right of the speedometer. While holding it, turn the ke…

    Frequently Asked Questions

    • C3 2016-2023 - What does the MAX warning light on Citroen C3 indicate? Read answer
    • C3 2016-2023 - How to reset the car radio of the Citroen C3? Read answer
    • C3 2009-2016 - What does the SERV warning light indicate in the Citroen C3? Read answer

How to replace the handbrake button on the Opel Mokka?

The handbrake button on the Opel Mokka can be replaced without going to a mechanic. The installation system is snap-fit with plastic clips and does not require special tools. First, remove the old button, possibly using a flat screwdriver to pry it off. Next, check for any fragments and remove them using tweezers if necessary. At this point, install the new button by placing it in its seat and applying light pressure to snap the clips into place.

Watch the video!


by ScegliAuto

More videos