Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to remove the interior door panel of a Cupra Leon

Model: Cupra Leon MK 1 - Years 2022-2026
Part: Door trim panel

To remove the door panel of a Cupra Leon, start by using a plastic tool to pry under the window control switch panel, remove the electrical connectors by gently prying inside the connectors themselves, and then remove the screw inside the exposed compartment. Next, use a larger tool to pry all around the door to release the clips holding the panel in place around the perimeter, starting from the bottom. Remove the chrome trim at the bottom of the door armrest so that the leather-covered part can be removed: underneath, you will find a screw. Unscrew it and then pull the panel upwards, which is now free. Disconnect the electric window connector and the panel can be removed.

Posted on 20 November 2025 by ScegliAuto

Video tutorial

Related tutorials

Where are the fuses of the Cupra Leon located?
Where are the fuses of the Cupra Leon located?
Cupra Leon (2022-2026 / MK 1) On board the Cupra Leon, the fuses are positioned inside the appropriate fuse boxes that regulate the operation of the devices: in this type of vehic…
Where is the fuse box of the engine of the Cupra Leon 2025 located?
Where is the fuse box of the engine of the Cupra Leon 2025 located?
Cupra Leon (2022-2026 / MK 1) In this new mini guide dedicated to those of you who own the new Cupra Leon 2025, we will explain the steps you need to take to easily locate the eng…
How to Replace the Air Filter of the Cupra Leon
How to Replace the Air Filter of the Cupra Leon
Cupra Leon (2022-2026 / MK 1) Replacing the engine air filter on your Cupra Leon is straightforward, even if you lack experience with such tasks. First, ensure you have a new air …

How to Replace the Battery on a Honda Vision 110

To replace the battery on a Honda Vision 110, you need to remove the front fairing of the motorcycle, located directly under the front headlamp. To loosen this panel, unscrew the two screws found at its top, just below the handlebar. Once these screws are loosened, lever under the panel to detach it, gaining access to the battery underneath: this battery must be removed from its housing by unscrewing the fixing screws and disconnecting the power cables, replacing it with a new one.

Watch the video!


by ScegliAuto

More videos