Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the front door of a Dacia Sandero

Model: Dacia Sandero - Years 2008-2012
Part: Car door

Video tutorial
Detailed instructions - To replace the front door of a Dacia Sandero, open the door and support it with a prop to prevent it from falling. Disconnect the electrical connector of the wiring, usually located in the pillar, by removing the rubber cover. Mark the position of the hinges to facilitate subsequent alignment. Unscrew the hinge bolts fixed to the pillar and remove the door with the help of another person. Position the new door aligning the hinges with the marked references and screw in the bolts without tightening them completely. Adjust the alignment, then tighten fully and reconnect the wiring. Check the opening, closing, and correct alignment.

Posted on 30 September 2026 by ScegliAuto


Related tutorials

How to Remove the Door Panel of a Dacia Sandero?
How to Remove the Door Panel of a Dacia Sandero?
Dacia Sandero (2012-2020 / B8) Before you begin, open the door of your Dacia Sandero. Start by prising off and removing the window switch, simply by extracting the internal retaini…
How to replace the speaker of the Dacia Sandero
How to replace the speaker of the Dacia Sandero
Dacia Sandero (2012-2020 / B8) Replacing the speaker of the Dacia Sandero is an operation that can be carried out completely independently, as the steps to be taken are simple and …
How to disassemble the front door panel in the Dacia Sandero?
How to disassemble the front door panel in the Dacia Sandero?
Dacia Sandero (2012-2020 / B8) In this tutorial we can see how to disassemble the front door panel in the Dacia Sandero, an extremely simple and quick operation. First of all, we o…

How to set the clock on the Vespa 125 Primavera?

To set the clock on the Vespa 125 Primavera, press and hold the black button located just below the black knob on the bike: keep the button pressed until the hour number starts to flash. Once it is flashing, you can change the hours with single presses of the same button; then, by pressing and holding the button again, the hour number will stop flashing and the minute number will start to flash, which can be modified in the same way, confirming the input by holding the button.

Watch the video!


by ScegliAuto

More videos