Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Reset the TPMS on the Dacia Duster

Model: Dacia Duster HS, MK 1 - Years 2010-2017
Part: Tire pressure warning light

Whenever the pressure of a tyre drops below the manufacturer's minimum value, the low pressure warning light illuminates on the instrument panel. The first thing to do is restore the correct tyre pressures and then proceed to reset the warning light on the dashboard. To do this, access the driver's seat, turn on the ignition, and on the end of the right multifunction lever, there is a control that allows you to scroll through the onboard computer settings; press it multiple times until you reach the "setup" indication and hold it for a few seconds until the warning light goes out.

Updated on 22 May 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Tyre Pressure Warning Light (TPMS) on the Dacia Duster
How to Reset the Tyre Pressure Warning Light (TPMS) on the Dacia Duster
Dacia Duster (2017-2024 / HM, MK 2) Below are the instructions on how to reset the tyre pressure warning light on the Dacia Duster; before performing the TPMS reset, ensure all four tyr…
How to Reset the TPMS Light on a Dacia Duster from 2016 to 2022
How to Reset the TPMS Light on a Dacia Duster from 2016 to 2022
Dacia Duster (2017-2024 / HM, MK 2) Today, we will show you how to reset the TPMS light related to the tyre pressure on a Dacia Duster produced from 2016 to 2022. To reset or update the…
How to reset the tire pressure warning on the Dacia Duster
How to reset the tire pressure warning on the Dacia Duster
Dacia Duster (2017-2024 / HM, MK 2) Below are the steps that will allow us to reset the tire pressure warning of the Dacia Duster; before resetting the TPMS sensors, it is necessary tha…

Other guides you may be interested in

How to Check the Oil Level on a Jeep Renegade?

To check the oil level on a Jeep Renegade, you need to open the bonnet to access the components inside the engine bay: on the lower left side of the engine block, you will find the dipstick for checking the level. This should be pulled out and thoroughly cleaned with a cloth: once cleaned, reinsert it back into its tube and pull it out immediately after. This way, you can check that the oil mark is between the minimum and maximum levels; finally, you can place the dipstick back in its tube.

Watch the video!


by ScegliAuto

More videos