Do it yourself
| ||||
|
Model: Derbi Gp1 50
In order to disassemble the Derbi GP1 engine, you must first extract the block from inside its housing compartment: to do this, you will need to loosen the screws that fix the bolts of the relative supports and disconnect all the cables relating to the sensors. At this point the block can be extracted from inside its seat and it will be possible to detach the cylinder from the upper part: the piston can be removed from the connecting rod by enlarging the ring and removing the pin. The lower part of the engine can be opened and it will then be possible to replace the necessary components.
Posted on 8 June 2023 by ScegliAuto
|
How to replace the clutch on the Honda CRF 450R?The replacement of the Honda CRF 450 clutch is carried out by loosening the bolts that secure the crankcase positioned on the right side of the bike, so that it can be removed. After the crankcase has therefore been removed, it will be possible to access the components that are inside it: the discs that make up the clutch can all be removed after having unscrewed the bolts that secure them. Once the discs have been removed, it will be possible to insert the new ones, fixing them with the relative bolts and covering everything with the special cover previously removed. by ScegliAuto More videos
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.003
(c) ScegliAuto 2024 - info@scegliauto.com - Privacy Policy VAT number: IT01247470535 |