Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to reset the service light on the DR3?

Model: DR 3 MK 1 - Years 2018-2026
Part: Service warning light

The reset of the service light or maintenance light on DR 3 models should only be performed if you have had a complete maintenance service done on your vehicle at the workshop. If the maintenance service was done before the wrench-shaped light was active, you can perform the reset afterwards. The first thing to do is to press the left button on the steering wheel with the instrument panel turned off, and then, while holding the button, turn on the instrument panel. The second thing to do is to release the button. You will notice that the service light has turned off. Turn off and on the instrument panel to confirm.

Posted on 1 February 2024 by ScegliAuto

Video tutorial

Related tutorials

How to remove the seats of the DR3
How to remove the seats of the DR3
DR 3 (2018-2026 / MK 1) You need to leave for a car trip and you need more space but you don't know how to lower the seats of your DR3 completely? Don't worry, we'll take ca…
How to reset the service light of the 2018 DR
How to reset the service light of the 2018 DR
DR 3 (2018-2026 / MK 1) The reset of the service light, related to the car service, of the 2018 DR 3 follows simple and quick steps that can be performed independently thank…
How to access the settings of the DR 3 - EVO 3
How to access the settings of the DR 3 - EVO 3
DR 3 (2018-2026 / MK 1) Below we will see the instructions that will allow us to enter the settings menu and discover the features of the DR 3, but also of the EVO 3. First …

Other guides you may be interested in

How to Remove the Gear Knob on an Opel Astra

How to replace the gear knob on an Opel Astra? Follow these steps: use a plastic lever to disconnect the leather gaiter frame (if you need to replace it). Grip the knob with both hands and pull it upwards (with a strong and decisive motion) until it comes off the gear stick. For installation: fit the new gaiter and position it on the centre tunnel, take the new knob and push it onto the stick, tightening it until fully threaded. Test the movement of the stick on the centre tunnel to ensure the knob is correctly fitted.

Watch the video!


by ScegliAuto

More videos