Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Front Seats from a Classic Fiat 500

Model: Fiat 500 Epoca - Years: 1957, 1958, 1959, 1960, 1961, 1962, 1963, 1964, 1965, 1966, 1967, 1968
Part: Seat

See other generations:
Video tutorial

How to remove the front seats from a classic Fiat 500? In this video, follow these steps: first, slide the seats forward and lift them up, then unscrew the retaining bolts on the rails fixed to the car's chassis using a socket or impact driver (use appropriate release agents if the bolts do not unscrew).

Remove the retaining bolts at the bottom of the car (use spanners on both the upper and lower parts of the connecting bolts).

Finally, install the new front seat by following the disassembly steps mentioned earlier.


Updated on 3 March 2026 by ScegliAuto


Related tutorials

How to Adjust the Idle Speed of the Classic Fiat 500
How to Adjust the Idle Speed of the Classic Fiat 500
Fiat 500 (2007-2024 / 312) Today's guide shows you the steps to adjust the idle speed of the classic Fiat 500. First, open the bonnet and locate the throttle cable adjuster at …
How to adjust the headlights of the Fiat 500
How to adjust the headlights of the Fiat 500
Fiat 500 (1957-1975 / Epoca) Below are the instructions that will allow us to adjust the headlights of the vintage Fiat 500. First, we open the front hood of the car and begin to…
How to repair the front folding seat of the Fiat 500
How to repair the front folding seat of the Fiat 500
Fiat 500 (2007-2024 / 312) The instructions in this guide will show us how to repair the front folding seat of the Fiat 500. First, we open the front door of the car and start …

How to Open the Bonnet on the Mitsubishi L200?

In this tutorial, you will see how to open the bonnet on the Mitsubishi L200, a very simple operation that follows the standard procedure. First, open the vehicle and go to the driver's side, then locate the lever at the lower outer area, just in front of the pedals, and pull it. Next, position yourself in front of the bonnet, locate the second lever above the Mitsubishi logo, and push it to the right, releasing the latch. At this point, you can fully lift the bonnet and secure it with the prop rod.

Watch the video!


by ScegliAuto

More videos