|
Do it yourself
| |||
| ||||
|
Model: Ducati Panigale V2
To replace the exhaust fitted on the Ducati Panigale V2, you will need to loosen the screws that secure the exhaust terminal to its housing, located at the lower part of the right side of the bike. Once the screws securing the terminal are loosened, you can widen the clamp positioned between the exhaust and the collector, allowing you to insert the new one. This can now be secured with the screws and connected to the collector with its clamp, ensuring everything functions correctly.
Posted on 24 June 2026 by ScegliAuto
Video tutorial
Related tutorials
Panigale V2
To replace the exhaust on the Ducati Panigale V2S, you will need to loosen the screws that secure it to its housing: it will be located near the rear…
Panigale V2
To replace the rearview mirror of the Ducati Panigale V2, you need to loosen the screws located just below the windscreen, on the inside above the ha…
Panigale V2
To change the engine oil on a Ducati Panigale V2, unscrew the drain plug located at the central lower part of the bike: once the plug is unscrewed, a…
|
How to Change the Speed Unit on the Piaggio Mp3
If the speed displayed on your Piaggio Mp3 is in a unit of measurement different from your preference, simply follow this mini guide to change it independently. First, start this procedure with the bike completely off. Then, press and hold the "Mode" button on the right knob for about three seconds and turn on the display. Once done, press the "Mode" button again to switch between units (from Km/h to Mph or vice versa). Finally, hold down "Set" to save the changes. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.579
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |