Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the engine oil of a Ducati Hypermotard?

Model: Ducati Hypermotard
Part: Engine oil

Video tutorial

To change the engine oil of a Ducati Hypermotard, it is necessary to follow some simple but important steps. First of all, place the motorcycle on a central or side stand so that it is stable.

Make sure the engine is warm, not hot, to facilitate the oil flow. Locate the oil drain plug, usually located on the lower side of the engine.

Place a suitable container under the drain plug to collect the used oil. Unscrew the drain plug and let the used oil drain completely into the container. Make sure to completely remove the old oil before proceeding.

Once all the oil has been drained, reinstall and tighten the drain plug securely. Next, fill the engine with the new engine oil of the specification recommended by the manufacturer.

Use a funnel to prevent oil spills. Finally, check the oil level with the dipstick and add oil if necessary to bring it to the correct level.

Make sure to properly dispose of the used oil at an authorized recycling center.


Posted on 8 January 2025 by ScegliAuto


Related tutorials

How to Change the Engine Oil and Oil Filter on the Ducati Hypermotard
How to Change the Engine Oil and Oil Filter on the Ducati Hypermotard
Hypermotard Discover the steps to perform routine maintenance by changing the engine oil and oil filter on the Ducati Hypermotard. First, place your motorcycle o…
Change the Engine Oil and Oil Filter on the Ducati Hypermotard
Change the Engine Oil and Oil Filter on the Ducati Hypermotard
Hypermotard Below are the main steps to perform the routine maintenance service by changing the engine oil and oil filter on the Ducati Hypermotard. First, place…
How to Change Engine Oil on a Ducati Hypermotard
How to Change Engine Oil on a Ducati Hypermotard
Hypermotard Start by positioning your Ducati Hypermotard vertically using a motorcycle stand. Then, run the engine for a few minutes. After that, unscrew and rem…

How to Replace the Brake and Clutch Levers on a Kawasaki Z750

Briefly follow these instructions to remove and replace the front brake and clutch levers on the Kawasaki Z750 motorcycle. First, place your motorcycle on a stand and start by unscrewing the pin for the front brake lever, loosening the nut located at the bottom; remove and replace the lever with a new one, securing it properly and finally adjusting the lever travel as shown in the video. Similarly, replace the clutch lever by unscrewing the pin; in this case, attach the metal cable to the lever and make the adjustment using the adjuster!

Watch the video!


by ScegliAuto

More videos