Do it yourself
Frequently asked questions about cars and motorcycles
Start by positioning your Ducati Hypermotard vertically using a motorcycle stand. Then, run the engine for a few minutes. After that, unscrew and remove the lower oil drain bolt to allow the engine oil to drain out. Once the oil has drained, re-screw the drain bolt, then unscrew and remove the upper filler cap. At this point, using a funnel, add the new engine oil, and finally, re-screw the filler cap, completing the oil change.

Updated on 16 April 2026 by ScegliAuto

Video tutorial

Related tutorials

Hypermotard Below are the main steps to perform the routine maintenance service by changing the engine oil and oil filter on the Ducati Hypermotard. First, place…
Hypermotard The replacement of the motor oil of the Ducati Hypermotard is done by loosening the drain plug of the oil pan, located in the central bottom part of …
Hypermotard To replace the engine oil of the Ducati Hypermotard, unscrew the drain plug located at the central lower part of the motorcycle. Once all the oil has…

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos