Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Brake Fluid Change on Ducati Monster 800

Model: Ducati Monster 800
Part: Brake fluid

Video tutorial

Remove the bleed valve cap, insert a tube connected to a container (to collect the used fluid), and unscrew the top cover of the brake fluid reservoir. Pull the brake lever several times to pump out the used fluid while topping up with new lubricant: continue this process until the fluid coming out into the container is clear.

Close the bleed valve and finish topping up. Close the fluid reservoir by screwing the cap back on and replace the dust cap. The same procedure will be performed for the lower wheel.


Updated on 9 April 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil on the Ducati Monster 800?
How to Change the Engine Oil on the Ducati Monster 800?
Monster 800 To change the engine oil on the Ducati Monster 800, loosen the bolt located at the bottom of the bike so that all the used oil can be collected in a …
How to Replace the Rear Brake Pads on a Ducati Monster 800?
How to Replace the Rear Brake Pads on a Ducati Monster 800?
Monster 800 To replace the rear brake pads on a Ducati Monster 800, loosen the screws that secure the brake caliper to the corresponding sprocket. Once the calip…
Replacing the Rear Brake Pads on the Ducati Monster 800
Replacing the Rear Brake Pads on the Ducati Monster 800
Monster 800 In today's video, you will see how to remove and replace the rear brake pads on the Ducati Monster 800 motorcycle. First, place your bike on a stand …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Replace the Exhaust of the MV Agusta F3 675?

To replace the exhaust of the MV Agusta F3 675, loosen the screws securing the right side panel of the vehicle, near the footpeg. Once this panel is removed, you can loosen the screw that secures the clamp connecting the exhaust to the rest of the system. By loosening the screws that hold the old exhaust at the top, you can remove it and replace it with a new one. The new exhaust will then be connected to the system with the fixing ring, secured at the top with the appropriate screw, and then covered with the panel.

Watch the video!


by ScegliAuto

More videos