Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Ducati
    3. : Monster 800

Ducati Monster 800 - Videoguide

Ducati Monster 800
How do you replace the rear brake pads on the Ducati Monster 800?
The replacement of the rear brake pads of the Ducati Monster 800 is done by loosening the screws that fix the brake caliper to the corresponding gear wheel: …read all…
Posted on 31 July 2023 by ScegliAuto
Ducati Monster 800
Replacement of the rear brake pads of the Ducati Monster 800.
In today's video, we will see how to disassemble and replace the rear brake pads of the Ducati Monster 800 motorcycle. First, we put our motorcycle on the …read all…
Posted on 13 May 2023 by ScegliAuto
Ducati Monster 800
How do you change the engine oil on a Ducati Monster 800?
In order to change the engine oil of the Ducati Monster 800, you need to loosen the screw located in the lower part of the bike, so that all the used oil can …read all…
Posted on 17 November 2022 by ScegliAuto
Ducati Monster 800
How to replace the front and rear brake pads on the Ducati Moster
In this video tutorial we will see how to remove and replace the front and rear brake pads of the Ducati Monster, in simple steps. First we go to unscrew the …read all…
Posted on 19 June 2022 by ScegliAuto
Ducati Monster 800
Basic service on Ducati Monster
Start the engine for a few minutes to warm up all the oil in the circuit. Don't heat it up too much or you won't be able to get your hands on it later on. …read all…
Posted on 6 March 2024 by ScegliAuto
Ducati Monster 800
Disassembly of the Ducati Monster 800 clutch actuator
In this video tutorial we will see how to disassemble and replace the clutch actuator of a Ducati Monster 800. First we are going to remove our clutch cable by …read all…
Posted on 24 January 2024 by ScegliAuto
Ducati Monster 800
Ducati Monster 800 brake oil change
Remove the bleed valve cap, insert a tube connected to a container (where you will collect the used oil) and unscrew the upper cover of the brake oil …read all…
Posted on 22 January 2024 by ScegliAuto
Checks and maintenance (1) Brake oil (1) Engine oil (1) Brake pads (3)

How to reset the tire pressure warning light on Dacia Sandero?

Let's see below how it is possible to reset the low tire pressure signal on the car: first of all it is necessary to check the correct tire pressure by comparing it with the pressures reported in the use and maintenance manual. After that, turn on the ignition and locate the command on the right side of the steering wheel at the top that allows you to access the on-board computer menu, then select the car symbol, after which select the "up arrow" command up to that the indication "tire pressure" appears on the display. At that point, press the "Ok" control on the steering wheel and keep it pressed to reset the signal.

Watch the video!


by ScegliAuto

More videos