Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In this tutorial, you will learn how to remove and replace the front and rear brake pads on a Ducati Monster in simple steps. First, unscrew the bolts of the rear brake caliper to remove it from the disc; then extract the brake pads inside by removing the central pin with pliers, as shown in the video. Clean the caliper of any dirt and press the piston back in; then insert the new pads and reassemble everything, applying the same procedure for the front ones!

Updated on 29 May 2026 by ScegliAuto

Video tutorial

Related tutorials

Replacing the Rear Brake Pads on the Ducati Monster 800
Replacing the Rear Brake Pads on the Ducati Monster 800
Monster 800 In today's video, you will see how to remove and replace the rear brake pads on the Ducati Monster 800 motorcycle. First, place your bike on a stand …
How to Replace the Rear Brake Pads on a Ducati Monster 800?
How to Replace the Rear Brake Pads on a Ducati Monster 800?
Monster 800 To replace the rear brake pads on a Ducati Monster 800, loosen the screws that secure the brake caliper to the corresponding sprocket. Once the calip…
Removing the Clutch Actuator on Ducati Monster 800
Removing the Clutch Actuator on Ducati Monster 800
Monster 800 In this video tutorial, learn how to remove and replace the clutch actuator on a Ducati Monster 800. First, remove the clutch cable by unscrewing the…

What Does the V-Belt Light Indicate on a Yamaha NMAX Scooter and How to Remove It?

If the V-BELT light has illuminated on the instrument cluster of your Yamaha NMAX scooter, it means it is time to replace the drive belt as it has exceeded the relevant interval. You can entrust this maintenance task to your trusted workshop; the cost will not be particularly excessive. Once this is done, you can manually reset the light by following the procedure shown in this tutorial. First, turn on the instrument cluster, then repeatedly press the left button on the dashboard to reach the service interval in question. At this point, press and hold the right button once to initialise the reset, and a second time to complete it.

Watch the video!


by ScegliAuto

More videos