|
Do it yourself
| |||
| ||||
|
Model: Tm Racing Smr 125
In order to replace the footpegs of the TM Racing SMR 125, you need to loosen the nut that secures them to the respective housings on the side of the bike: once these screws have been loosened, it will be possible to remove both footpegs from their housings, so that new ones can be inserted. Once these have been positioned, you will need to reposition the fastening nuts that were previously removed; once these have been inserted, you can verify that the footpegs are securely in place and do not cause any issues while riding.
Posted on 5 January 2025 by ScegliAuto
This video is currently unavailable
Related tutorials
Smr 125
To replace the front fairing on the TM Racing SMR 125, you need to unscrew the screws that secure it from the inside, just below the handlebars. Once…
Smr 125
To change the engine oil on a TM Racing SMR 125, loosen the drain plug located at the bottom centre of the bike. This will allow all the oil to drain…
Smr 125
It will be possible to replace the exhaust of the TM Racing SMR 125 by loosening the screws that secure the terminal to its housing, next to the fend…
|
How to Change the Engine Oil on a Beta RR 125?
To change the engine oil on a Beta RR 125, loosen the drain plug located at the bottom centre of the bike. Once removed, collect all the used oil in a suitably positioned container. After the oil has completely drained, remove the oil filter next to the drain plug to replace it with a new part. Now, refill by adding the necessary amount of oil through the hole on the right side of the engine casing. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.005
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
