Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions

- Do-it-yourself video guides

Peugeot Citystar 125
How do you replace the cranks on the Peugeot Citystar 125?
In order to replace the cranks on the Peugeot Citystar 125, it is necessary to completely detach the fairing located at the rear wheel, from the side of the …read all…
Posted on 6 May 2023 by ScegliAuto
Kymco Xciting 400
How to replace footpegs on Kymco Xciting 400
In today's video we see how to replace the original footpegs on the Kymco Xciting 400. This operation may be necessary when the footpeg cover is worn out or to …read all…
Posted on 13 December 2022 by ScegliAuto
Ktm Exc F 500
How to remove footpegs from KTM Exc 500
In this short and simple guide we will see how to disassemble and replace the footpegs of the KTM Exc 500 enduro motorcycle, following the instructions below. …read all…
Posted on 21 November 2022 by ScegliAuto
Moto Guzzi V7 Iii
How to install the rear sets on the Moto Guzzi V7 III
In this video tutorial we will see how to install the rear sets on the Moto Guzzi V7 III, following the instructions below. First of all, let's put the stand …read all…
Posted on 18 September 2022 by ScegliAuto
Harley Davidson Softail
How to replace the gear lever on the Harley Davidson Softail
In this video we will see how to disassemble and replace the gear lever of the Harley Davidson Softail, following these simple and quick steps. First of all, …read all…
Posted on 30 June 2022 by ScegliAuto
Benelli Tnt 125
How to replace the gear lever on Benelli TNT 125
Let's find out, in this video tutorial, how to disassemble and replace the gear lever of the Benelli TNT 125 motorcycle, following the instructions below. …read all…
Posted on 1 May 2024 by ScegliAuto
Ducati Monster 700
How to replace the brake pedal on the Ducati Monster 700
In this video tutorial we will see how to remove and replace the brake pedal of the Ducati Monster 700; in the same way we will also replace the gear pedal. To …read all…
Posted on 1 April 2024 by ScegliAuto
Enfield Interceptor 650
How to replace the footpegs of a Royal Enfield Interceptor 650
Before we can begin, we will have to go and fix and lift our Royal Enfield on the deck, so that we can work more comfortably on the footpegs. So let's start by …read all…
Posted on 24 March 2024 by ScegliAuto
Piaggio Ciao
How to disassemble the pedal unit on the Piaggio Ciao, Si, Bravo, Garelli
In this video tutorial we will see how to disassemble the pedal assembly on the Piaggio Ciao, but also on the Si, Bravo and Garelli, by following these simple …read all…
Posted on 2 March 2024 by ScegliAuto
Moto Guzzi V85tt
How to replace the rear footpegs on the Moto Guzzi V85TT
In today's video tutorial we will see how to remove and replace the rear footpeg pedals on the Moto Guzzi V85TT, in simple and quick steps. First of all, let's …read all…
Posted on 17 February 2024 by ScegliAuto

Handbrake adjustment on Ford Ecosport

First remove the plastic profile at the base of the gear lever. To do this, slightly widen the side edges and carefully lift it to release it. There is no need to remove it completely, just move it forward to avoid bother. Now remove the plastic center console around the handbrake by first working from the rear to release it and lifting it until the brake lever passes. Also in this case it is not necessary to remove it completely but, paying attention to the connected cables, it can be stowed in front of the passenger seat. At this point we notice that at the base of the handbrake lever, on the front, we find a nut. By acting on it, with a 10 wrench, we can adjust the brake force, increasing it by turning the nut clockwise, or decreasing it by turning it counterclockwise. Once adjusted, the center console can be repositioned first, pressing lightly to engage it, and then the profile of the gearbox base.

Watch the video!


by ScegliAuto

More videos