Do it yourself
Frequently asked questions about cars and motorcycles

How to Install Rearsets on the Moto Guzzi V7 III

Model: Moto Guzzi V7 Iii
Part:

Video tutorial

In this video tutorial, you will learn how to install rearsets on the Moto Guzzi V7 III, following the instructions below. First, place the stand on your bike and start by removing the old footpegs; to do this, unscrew the two fixing screws using an Allen key, as illustrated in the video.

Once the footpegs are removed from both sides, replace them with the new rearsets; secure them properly with the supplied bolts to ensure safety while riding!


Updated on 14 June 2026 by ScegliAuto


Related tutorials

V7 Iii To replace the exhaust on the Moto Guzzi V7 III, loosen the screws that secure the exhaust terminal to its housing near the rear wheel on the right s…
V7 Iii Below we will see the step-by-step instructions that will allow us to disassemble and repair the speedometer of the Moto Guzzi V7 III. First, we put …
V7 Iii These brief and simple steps will show us how to disassemble and replace the voltage regulator of the Moto Guzzi V7 III Rough. First, we place the mo…

How to Replace the Headlight Bulb on the Suzuki Address 110

To replace the headlight bulb on the Suzuki Address 110, you must completely remove the wing mirrors so that you can rotate them counterclockwise: once removed, proceed to loosen the screws securing the front fairing, located at the sides of the instrument cluster. Once the front fairing is removed, disconnect the internal connector of the headlight, allowing the bulb inside to be extracted and replaced with a new one; after replacement, reassemble all the removed parts.

Watch the video!


by ScegliAuto

More videos