Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Footpegs on the KTM Exc 500

Model: Ktm Exc F 500
Part:

Video tutorial

In this brief and simple guide, you will learn how to disassemble and replace the footpegs on the KTM Exc 500 enduro bike, following the instructions below. First, place your bike on a stand and start by removing the peg pin; to do this, straighten the split pin and then tap on the right side to extract the pin and the small spring, as shown in the video.

At this point, remove the footpeg and replace it with the new one of the correct type; secure it properly with the new pin, following the video tutorial until the end for reassembly!


Updated on 26 June 2026 by ScegliAuto


Related tutorials

How do you replace the front brake pads of the KTM EXC-F 500?
How do you replace the front brake pads of the KTM EXC-F 500?
Exc F 500 To replace the front brake pads of the KTM EXC-F 500, you will need to loosen the screws that secure the brake caliper to the corresponding disc: onc…
How to Change the Engine Oil on the KTM EXC-F 500
How to Change the Engine Oil on the KTM EXC-F 500
Exc F 500 In this video tutorial, you will see the main instructions for replacing the engine oil and oil filter, performing the routine maintenance service on…
How to Replace the Clutch on the KTM EXC-F 500?
How to Replace the Clutch on the KTM EXC-F 500?
Exc F 500 To replace the clutch on the KTM EXC-F 500, loosen the screws securing the specific cover located on the left side of the bike in the lower central a…

How to Adjust the Headlight Height on a BMW R1300 GS

In this brief guide, you will find the main instructions on how to adjust the height of the front headlight on the BMW R1300 GS motorcycle. First, place the motorcycle on its stand and begin by removing the passenger seat, retrieving the Torx key found underneath it. Then, locate the headlight height adjustment screw behind the headlight, situated behind the instrument cluster display, as shown in the video. To make the correct adjustment, position yourself in front of a fixed reference point, preferably in low light.

Watch the video!


by ScegliAuto

More videos