Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Clutch on the KTM EXC-F 500?

Model: Ktm Exc F 500
Part: Clutch

Video tutorial

To replace the clutch on the KTM EXC-F 500, loosen the screws securing the specific cover located on the left side of the bike in the lower central area. Once this is released, proceed to remove the clutch discs located underneath.

At this point, insert the new discs into the designated slot so that they can be secured with the corresponding screws. Now cover everything with the cover, which must be secured in place with the relevant screws, ensuring that everything is functioning correctly.


Updated on 7 November 2026 by ScegliAuto


Related tutorials

How to Remove the ECU from the KTM EXC 500
How to Remove the ECU from the KTM EXC 500
Exc F 500 In today's tutorial, you will learn how to remove and replace the engine control unit (ECU) of the KTM EXC 500 enduro bike by following these simple …
How to Replace the Front Wheel of a KTM EXC 500
How to Replace the Front Wheel of a KTM EXC 500
Exc F 500 Today, in this brief and simple guide, we will provide instructions for removing and replacing the front wheel of the KTM EXC 500 enduro bike. First,…
Replacing the Front Headlight Bulb on the KTM EXC-F 500
Replacing the Front Headlight Bulb on the KTM EXC-F 500
Exc F 500 .. the front headlight bulb on the KTM EXC-F 500 enduro bike. First, remove the front headlight by unscrewing the screws to access the rear of the.. …

How to Replace the Rear Brake Pads on a Derbi Senda 125?

To replace the rear brake pads on a Derbi Senda 125, loosen the nut that secures the central axle of the rear wheel so that it can be completely removed from its housing. Once the wheel is removed, you can slide out the pin that secures the pads inside the brake caliper and remove them from their housing. After the old pads have been removed, insert the new replacement parts, securing them with the pin. Finally, reinstall the rear wheel, positioning it at the end of the swingarm.

Watch the video!


by ScegliAuto

More videos