Do it yourself
Frequently asked questions about cars and motorcycles
Car Tutorial (Do it yourself) Motorcycle Tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Benelli
    3. :
  3. Tnt 125
    4. : How to replace the gear lever on Benelli TNT 125

Model: Benelli Tnt 125
Part:
How to replace the gear lever on Benelli TNT 125

Let's find out, in this video tutorial, how to disassemble and replace the gear lever of the Benelli TNT 125 motorcycle, following the instructions below. First we put the central stand to our bike and start by unscrewing the fixing nut of our gear lever; we then remove the lever from the transmission pin, as shown in the video. At this point we are going to install the new gear lever, having the same length as the original one; then let's go and tighten it perfectly on the pin, applying the reverse procedure of disassembly!


Posted on 1 May 2024 by ScegliAuto

How do you disassemble the engine of the TM Racing EN 250?

To disassemble the engine of the TM Racing EN 250, you need to loosen the screws that fix the engine block to its housing: by loosening the screws that fix the engine to the frame, you will also be able to loosen those that fix the intake and exhaust pipes, then disconnect the connectors related to the sensors. In this way, you can proceed by removing the cylinder from the top and disconnecting the piston inside from the connecting rod; at this point, you can remove the connecting rod from the engine shaft and access the additional components at the base of the engine block.

Watch the video!


by ScegliAuto

More videos