Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Changing the engine oil in a Benelli TNT 125 is an extremely simple and quick task. First, ensure the engine is cool enough. Then, position a container underneath, unscrew the drain plug, and allow all the oil in the system to drain out. Next, open the filter housing, replace the filter, clean any dirt residue, and reassemble everything. Finally, pour in the required amount of oil through the designated top hole.

Updated on 26 July 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil and Oil Filter on a Benelli TNT 125
How to Change the Engine Oil and Oil Filter on a Benelli TNT 125
Tnt 125 The information below will show you how to perform the routine maintenance service by changing the engine oil and oil filter on a Benelli TNT 125 mot…
How to Replace the Engine Oil and Oil Filter on a Benelli TNT 125
How to Replace the Engine Oil and Oil Filter on a Benelli TNT 125
Tnt 125 This guide shows how to perform routine maintenance by replacing the engine oil and oil filter on a Benelli TNT 125. First, place the motorcycle on i…
How to Replace the Engine Oil and Oil Filter on a Benelli TNT 125
How to Replace the Engine Oil and Oil Filter on a Benelli TNT 125
Tnt 125 In this guide, we will discover the instructions that will allow us to carry out the routine maintenance service, replacing the engine oil and oil fi…

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos